1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front seat assembly.
(Refer to the Body group - "Front seat")
|
3. |
Loosen the seat belt buckle mounting bolt (A) and remove the seat
belt buckle switch.
|
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...
Installation
•
Do not spill brake fluid on the vehicle: it may damage
the paint; if brake fluid does conta ...
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...