Hyundai Accent: Installation
| 1. |
Installation is the reverse of removal.
|
| 2. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
Removal
1.
Turn ignition switch OFF.
2.
Disconnect the brake fluid level switch connector (A) from the
reservoir.
3.
...
Brake Line. Components and Components Location
Components
...
See also:
Components and Components Location
Component Location
1. Head lamp (Low / High)
2. Turn signal lamp
3. Front fog lamp
4. Position lamp
5. Turn signal lamp (Side repeater)
6. High mounted stop lamp
...
Anchor Pretensioner (APT). Description and Operation
Description
Front anchor pretensioner operates as well as Belt Pretensioner at the
same time If it gets into its deploy condition after a collision. It is located
at near anchor on driver se ...
Line Pressure Control Solenoid Valve. Specifications
Specifications
Direct control VFS[LINE Pressure]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
500.14 ~ 9.81
(5.4 ~ 0.1, 7.6 ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com