Hyundai Accent: Brake Pedal. Repair procedures

Brake Pedal. Components and Components Location

Components 1. Brake pedal member assembly 2. Stop lamp switch 3. Pedal bushing 4. Return spring 5. Brake pedal 6. Brake pedal pad ...

Removal

1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

See also:

If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1. Pull off the roa ...

Reassembly
• Thoroughly clean all parts to assembled. • ...

Output Speed Sensor. Troubleshooting
Signal Waveform Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...