Hyundai Accent: Front Body A ( 4Door )
Hyundai Accent RB (2010-2018) Service Manual / Body (Interior and Exterior) / Body Dimensions / Front Body. Body Repair / Front Body A ( 4Door )
|
|
|
|
|
Hood hinge mounting hole (Ø10) |
Fender apron upper member tooling hole (Ø6.6) |
Front shock absorber cover panel tooling hole (Ø10) |
|
|
|
|
|
Roof panel front corner |
Front pillar outer panel corner |
|
Front Body B ( 4Door )
Hood hinge mounting hole (Ø10)
Fender apron upper member tooling
hole (Ø6.6)
Cowl under ...
See also:
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
Disassembly
Identify MLA(Mechanical lash adjuster), valves, valve
springs as they are removed so that each item can be reinstalled in
...
Wheel. Repair procedures
Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Hyundai Accent Manuals
В© 2011-2025 Copyright www.hamanual.com