Hyundai Accent: Adjustment
| 1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
| 2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
| 3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Replacement
Tail Gate Trim Replacement
•
When prying with a flat-tip screwdriver, wrap it with
prote ...
Front Door. Components and Components
Location
Components
1. Front door trim
2. Front door quadrant inner cover
3. Front door seal
4. Front door panel
5. Front door belt inside weatherstrip
6. Front door bel ...
See also:
Front Wheel Alignment
When using a commercially available computerized wheel alignment
equipment to inspect the front wheel alignment, always positio ...
Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
ECM Problem Inspection Procedure
1.
TEST ECM GROUND CIRCUIT: Measure resistance between
ECM and chassis ground using the backside of ECM harness connector as
ECM side check point. If the problem is fo ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com