Hyundai Accent: Seat Electrical

Installation

1. Install the BCM. 2. Install the crash pad lower panel. ...

Seat Heater. Components and Components Location

Components ...

See also:

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

Installation
• Do not turn the ignition switch ON and do not contact the battery cable while replacing the ...

Removal
1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) ...