Hyundai Accent: Inspection

Installation

1. Install the hazard lamp switch. 2. Connect the connectors. 3. Install the center fascia garnish. ...

Rheostat. Repair procedures

Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Cras ...

See also:

Inspection
1. Check the select cable for proper operation and for damage. 2. Check the shift cable for proper operation and for damage. ...

Reassembly
• Thoroughly clean all parts to be assembled. • ...

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...