1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the fog lamp connector (A).
|
3. |
Remove the fog lamp bulb (A) after turning in the counterclockwise
direction.
|
4. |
Remove the fog lamp assembly (A) after loosening 4 screws.
|
Front Impact Sensor (FIS). Description and
Operation
Description
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary pur ...
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
(-) terminal :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4l ...
Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures
reco ...