1. |
Disconnect the ignition switch connector (B) and key switch connector
(A) from under the steering column.
|
2. |
Check for continuity between the terminals.
|
3. |
If continuity is not specified, replace the switch.
|
Cowl Top Cover. Repair procedures
Replacement
1.
Remove the wiper arm cap (B) and remove the nuts, then remove
wiper arm (A).
Tighening torque :
22.6 ~ 26.5 Nm (2.3 ~ ...
Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
(-) terminal :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4l ...
Center console storage
To open the center console storage, pull up the lever. ...