Hyundai Accent: To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
To decrease the cruising speed
Follow either of these procedures:
Push the SET- switch and hold it. Your vehicle will gradually slow down.
Release the switch at the speed you want to maintain.
Push the SET- switch and re ...
To cancel cruise control, do one of the following
Press the brake pedal.
Press the clutch pedal with a manual transaxle.
Shift the shift lever into N (Neutral) with an automatic transaxle
Press the CANCEL switch located on the steering whe ...
See also:
Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
...
Side Impact Sensor (SIS). Description and Operation
Description
Side Impact Sensor (SIS) system consists of two P-SIS which are installed
at each center of the front door module (LH and RH) and two SIS which are installed
at each center pilla ...
Components(2)
[5 Door]
1. Roof trim
2. Retainer
3. Sunvisor
4. Assist handle
5. Assist handle bracket
...
Hyundai Accent Manuals
