If a large amount of unburned gasoline flows into
the converter, it may overheat and create a fire hazard. To prevent
this observe the following precautions and explain them to your customer.
|
1. |
Use only unleaded gasoline.
|
2. |
Do not run the engine while the car is at rest for
a long time. Avoid running the engine at fast idle for more than 10minutes
and idle speed for more than 20 minutes.
|
3. |
Do not measure engine compression for an extended
time. Engine compression tests must be made as rapidly as possible.
Remove the fuel pump relay before performing a compression test.
|
4. |
Do not dispose of used catalytic converter together
with parts contaminated with gasoline or oil.
|
Fuel requirements
Your new vehicle is designed to use only unleaded fuel having a pump octane number
((R+M)/2) of 87 (Research Octane Number 91) or higher.
Your new vehicle is designed to obtain maximum performance ...
Owner’s responsibility
NOTICE
Maintenance Service and Record Retention are the owner's responsibility.
You should retain documents that show proper maintenance has been performed on
your vehicle in accordance with ...
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
...