Symptoms
|
Possible Causes
|
Remedy
|
Coolant leakage
|
| •
|
From the bleed hole of the water pump
|
|
Visually check
|
| •
|
Check leaks after about ten-minute warming
up.
|
|
| •
|
If coolant still leaks, replace a water pump.
|
|
| •
|
If leakage stops, reuse the water pump (Do
not replace the pump with a new one).
|
|
| •
|
From gaskets or bolts
|
|
| •
|
Check the tightening of the water pump mounting
bolts.
|
|
| •
|
Retighten the mounting bolts.
|
|
| •
|
Check damage of gaskets or inflow of dust.
|
|
| •
|
Replace the gasket and clean dust off.
|
|
| •
|
From outer surface of water pump
|
|
| •
|
Check the material or any cracks of the water
pump.
|
|
| •
|
Poor material. If any crack found, replace
the water pump.
|
|
Noise
|
| •
|
From mechanical seals
|
| •
|
Impeller interference
|
|
Inspection with a stethoscope
|
| •
|
After starting the engine, check noise with
a stethoscope.
|
|
| •
|
If there is no noise, reuse the water pump(do
not replace it).
|
|
| •
|
If there is any noise from the water pump,
remove the drive belt and recheck.
|
|
Inspection after removing a drive belt
|
| •
|
After removing a water pump and a drive belt,
check noise again.
|
|
| •
|
If there is noise, reuse the water pump.
Check other drive line parts.
|
|
| •
|
If there is no noise, replace the water pump
with a new one.
|
|
Inspection after removing a water pump
|
| •
|
After removing a water pump and a drive belt,
check noise again.
|
|
| •
|
If there is any interference between them,
replace the water pump with a new one.
|
|
Overheating
|
|
Loosened impeller
|
| •
|
Corrosion of the impeller wing
|
|
| •
|
Check engine coolant.
|
| •
|
Poor coolant quality / Maintenance check
|
|
| •
|
Impeller seperation from the shaft
|
|
| •
|
Replace the water pump.
|
|
1.
Check each part for cracks, damage or wear, and replace
the coolant pump assembly if necessary.
2.
Check the bearing for damage, abnorma ...
See also:
Back-up Lamp Switch. Specifications
Specifications
1.
Working voltage: DC 10~15V
2.
Operating force: 3.0kg Max.
3.
Voltage drop: - 0.4V
...
Installation
1.
Installation is the reverse of removal.
•
...
Anti-lock brake system (ABS)
WARNING
ABS (or ESC) will not prevent accidents due to improper or dangerous driving
maneuvers. Even though vehicle control is improved during emergency braking, always
maintain a safe distance ...
Hyundai Accent: Water pump. Troubleshooting
Inspection
Radiator. Components and Components
Location