1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring
of thinning. If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes
then check the oil level. Oil level should be between the "L" and "F"
marks on the dipstick. If low check for leakage and add oil up to the
"F" mark.
|
For best performance and maximum protection of all
types of operation, select only those lubricants which :
|
ETC (Electronic Throttle
Control) System. Troubleshooting
Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7°
TPS
TPS 1 fault
ECM looks at TPS2
...
Repair procedures
Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door ...
Installation
1.
Installation is the reverse of removal.
•
...