Rotor |
1. |
Check that there is continuity between the slip rings
(C).
|
2. |
Check that there is no continuity between the slip
rings and the rotor (B) or rotor shaft (A).
|
3. |
If the rotor fails either continuity check, replace
the alternator.
|
1. |
Check that there is continuity between each pair
of leads (A).
|
2. |
Check that there is no continuity between each lead
and the coil core.
|
3. |
If the coil fails either continuity check, replace
the alternator.
|
Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures
reco ...
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left
on the tire. Replace the tire when ...
Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the steering wheel.
...