Hyundai Accent: Components and Components
Location
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Components and Components
Location
Components Location
|
1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Position Sensor (TPS) [integrated into ETC Module] 6. Crankshaft Position Sensor (CKPS) 7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake] 8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] 9. Knock Sensor (KS) 10. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1] 11. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2] 12. Rail Pressure Sensor (RPS) 13. Accelerator Position Sensor (APS) 14. Fuel Tank Pressure Sensor (FTPS) 15. Fuel Level Sender (FLS) |
16. A/C Pressure Transducer (APT) 17. ETC Motor [integrated into ETC Module] 18. Injector 19. Purge Control Solenoid Valve (PCSV) 20. CVVT Oil Control Valve (OCV) [Bank 1 / Intake] 21. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] 22. Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Control Valve (FPCV) 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] |
|
1. Engine Control Module (ECM) |
2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) |
|
|
|
|
4. Engine Coolant Temperature Sensor (ECTS) |
5. Throttle Position Sensor (TPS) 17. ETC Motor |
|
|
|
|
6. Crankshaft Position Sensor (CKPS) |
7. Camshaft Position Sensor (CMPS) [Bank 1 / Intake] 8. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] |
|
|
|
|
9. Knock Sensor (KS) |
10. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] |
|
|
|
|
11. Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] |
12. Rail Pressure Sensor (RPS) 18. Injector |
|
|
|
|
13. Accelerator Position Sensor (APS) |
14. Fuel Tank Pressure Sensor (FTPS) |
|
|
|
|
15. Fuel Level Sender (FLS) |
16. A/C Pressure Transducer (APT) |
|
|
|
|
19. Purge Control Solenoid Valve (PCSV) |
20. CVVT Oil Control Valve (OCV) [Bank 1 / Intake] |
|
|
|
|
21. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] |
22. Variable Intake Solenoid (VIS) Valve |
|
|
|
|
23. Fuel Pressure Control Valve (FPCV) |
24. Canister Close Valve (CCV) |
|
|
|
|
25. Ignition Coil |
26. Main Relay 27. Fuel Pump Relay 29. Multi-Purpose Check Connector [20-Pin] |
|
|
|
|
28. Data Link Connector (DLC) [16-Pin] |
|
|
|
Description and Operation
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation
of On Board Diagnostics (OBD) for vehicles sold in California beginning with
the 1988 model year. Th ...
See also:
Variant coding
After replacing the SRSCM with a new one, must be performed the “Variant
Coding” procedure.
1.
On ...
Repair procedures
Compession Pressure Inspection
If the there is lack of power, excessive oil consumption
or poor fuel economy, measure the comp ...
Removal
PODS-F ECU
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front pa ...
Hyundai Accent Manuals
© 2011-2025 Copyright www.hamanual.com