Hyundai Accent: Heated Oxygen Sensor (HO2S). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications
Specification
HO2S [Bank 1/Sensor 1]
|
Item |
Specification |
|
Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
|
A/F Ratio (λ) |
Output Voltage(V) |
|
RICH |
0.6 ~ 1.0 |
|
LEAN |
0 ~ 0.4 |
|
Item |
Specification |
|
Heater Resistance (Ω) |
Approx. 9.0 [21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic Converter.
The sensor output voltage varies ...
Heated Oxygen Sensor (HO2S). Troubleshooting
Signal Waveform
...
See also:
Description and Operation
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
ATF passes through the oil ...
Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14
(0.1 ~ 5.5, 1.42 ~ 7.82)
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Lift the vehicle.
3.
D ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com