Hyundai Accent: Fuel Tank Pressure Sensor
(FTPS). Specifications
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Fuel Tank Pressure Sensor
(FTPS). Specifications
Specification
|
Pressure [kPa (kgf/cm², in
H2O) |
Output Voltage (V) |
|
-6.67 (-0.068, -26.8) |
0.5 |
|
0 |
2.5 |
|
+6.67 (0.068, 26.8) |
4.5 |
Fuel Tank Pressure Sensor
(FTPS). Description and Operation
Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative
emission control system and is installed on the fuel tank, the fuel pump, or
the canister. It checks the purge ...
Fuel Tank Pressure Sensor
(FTPS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
See also:
Installation
1.
Install the rear combination lamp assembly.
2.
Connect the rear combination lamp assembly connector.
3.
Conn ...
Body Control Module (BCM). Specifications
Specifications
Item
Requirement
Remark
Rated voltage
DC 12V
Shall activate normally in these range.
Operat ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes.
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com