Hyundai Accent: Fuel Pressure Control Valve. Schematic Diagrams

Fuel Pressure Control Valve. Troubleshooting

Signal Waveform ...

Fuel Pressure Control Valve. Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve ...

See also:

Installation
1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Oil Pump. Components and Components Location
Components 1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaf ...

Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...