Hyundai Accent: Inspection

Hyundai Accent RB (2010-2018) Service Manual / Manual Transaxle System (M6CF1) / Manual Transaxle Control System / Shift Lever. Repair procedures / Inspection

1.	Check the select cable for proper operation and for damage.

2.	Check the shift cable for proper operation and for damage.

3.	Check the boots for damage.

4.	Check the boots for wear abrasion sticking, restricted movement or damage.

5.	Check for the weak or damaged spring.

Removal

Shift Lever Assembly Replacement 1. Remove the floor Interior console assembly. (Refer to "Interior (Console)" in BD group) ...

Installation

1. Installation is the reverse of removal. ...

See also:

Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraul ...

Manifold Absolute Pressure Sensor (MAPS). Troubleshooting
Signal Waveform ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com