Specifications
1. |
Working voltage: DC 10~15V
|
2. |
Operating force: 3.0kg Max.
|
3. |
Voltage drop: - 0.4V
|
4. |
Working temperature: -30°C ~ 100°C [-30°F ~ 212°F]
|
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil
...
Rear Seat Belt. Repair procedures
Replacement
Rear Seat Belt Replacement
[Sedan]
•
When installing the belt, make s ...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...