Hyundai Accent Manuals

Hyundai Accent: Inspection - Front Strut Assembly. Repair 
procedures - Front Suspension System - Suspension SystemHyundai Accent: Inspection

1.
Check the components for damage or deformation.
2.
Compress and extend the piston rod (A) and check that there is no abnormal resistance or unusual sound during operation.

3.
If non smooth working or unusual sound during operation, must be exchange the shock absorber.
Disposal
1.
Fully extend the piston rod.
2.
Drill a hole on the (A) section to remove gas from the cylinder.

•
The gas coming out is harmless, but be careful of chips that may fly when drilling.
•
Be sure to wear safety goggles or eye protection.

Disassembly and Reassembly
1. Compress the coil spring with a strut spring compressor. Do not compress the spring more than necessary. 2. Loosen the lock nut. ...

Front Lower Arm. Repair procedures
...

See also:

Thermostat. Components and Components Location
Components 1. Water inlet fitting 2. Thermostat 3. Heater pipe 4. Bypass hose 5. Water temp control assembly 6. Water temperature sensor 7. Gasket ...

Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. CAUTION ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com