Hyundai Accent Manuals

Hyundai Accent: Replacement - Rear Shock Absorber. Repair procedures - Rear Suspension System - Suspension SystemHyundai Accent: Replacement

Hyundai Accent RB (2010-2018) Service Manual / Suspension System / Rear Suspension System / Rear Shock Absorber. Repair procedures / Replacement

1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.

2.
Remove the rear shock absorber (A) from the frame by loosening the bolt.
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

3.
Loosen the bolt & nut and then remove the rear shock absorber (A) from the torsion beam axle (B).
Tightening torque :
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

4.
Installation is the reverse of removal.

Rear Shock Absorber. Repair procedures
...

Inspection
1. Check the components for damage or deformation. 2. Compress and extend the piston and check that there is no abnormal resistance or unus ...

See also:

Inspection
1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the s ...

Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, then install it on a pressure tester. 2. Ap ...

General Information
The Micro 570 Analyzer (Canada only) The Micro 570 Analyzer provides the ability to test the charging and starting systems, including the battery, starter and alternator. ...

Hyundai Accent Manuals


В© 2011-2024 Copyright www.hamanual.com