Hyundai Accent: Rear Torsion Beam Axle. Components and Components Location

Inspection

1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

Rear Torsion Beam Axle. Repair procedures

Replacement [Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

See also:

Replacement
[Disc Type] 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and ...

Removal
The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag. ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...