Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Depowered) / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT). Repair procedures / Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the lower anchor bolt.

3.

Remove the following parts.

(Refer to the Body group - "Interior trim")

A.	Door scuff trim

B.	Center pillar trim

4.	Remove the upper anchor bolt.

5.	Disconnect the seat belt pretensioner connector (A).

6.	Loosen the seat belt pretensioner mounting bolts (B,C) and remove the seat belt pretensioner.

Seat Belt Pretensioner (BPT). Repair procedures

...

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

See also:

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Wiper Switch Washer Switch ...

Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are ...

Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety location. 2.Connect connection hose (9) of the compressor directly to the tire valve. 3.Plug the compressor power c ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com