Hyundai Accent: Emergency starting
Connect cables in numerical order and disconnect in reverse order.
If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the LOCK position, check all connectors at ignition
coils and spark plugs. Reconnect any that may be disconnected or loose.
3. If the engine sti ...
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures.
If in doubt, we strongly recomme ...
See also:
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
2.
Adjust the tai ...
Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling up.
3. Check the removed fuse; replace it if it is blown. To remove or insert ...
To decrease the cruising speed
Follow either of these procedures:
Push the SET- switch and hold it. Your vehicle will gradually slow down.
Release the switch at the speed you want to maintain.
Push the SET- switch and re ...
Hyundai Accent Manuals
