Hyundai Accent: Emergency trunk safety release
Your vehicle is equipped with an emergency trunk release cable located inside
the trunk. The lever glows in the dark when the trunk lid is closed. If someone
is inadvertently locked in the trunk, pulling this handle will release the trunk
latch mechanism and open the trunk.
WARNING
- For emergencies, be fully aware of the location of the emergency trunk
safety release lever in this vehicle and how to open the trunk if you are accidentally
locked in the trunk.
- No one should be allowed to occupy the trunk of the vehicle at any
time. If the trunk is partially or totally latched and the person is unable
to get out, severe injury or death could occur due to lack of ventilation, exhaust
fumes and rapid heat build-up, or because of exposure to cold weather conditions.
The trunk is also a highly dangerous location in the event of a crash because
it is not a protected occupant space but is a part of the vehicle’s crush zone.
- Your vehicle should be kept locked and keys be kept out of the reach
of children. Parents should teach their children about the dangers of playing
in trunks.
- Use the release lever for emergencies only. Use with extreme caution,
especially while the vehicle is in motion.
To close the trunk, lower the trunk lid, then press down on it until it locks.
To be sure the trunk lid is securely fastened, always check by trying to pull it
up again.
WARNING
The trunk lid s ...
See also:
Components of the Tire Mobility Kit
0. Speed restriction label
1. Sealant bottle and label with speed restriction
2. Filling hose from sealant bottle to wheel
3. Connectors and cable for the power outlet direct connection
4. Holde ...
Adding equipment to or modifying your air bag-equipped vehicle
If you modify your vehicle by changing your vehicle's frame, bumper system, front
end or side sheet metal or ride height, this may affect the operation of your vehicle's
air bag system. ...
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...