Inspection
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the roof trim.
(Refer to the BD group - "Roof trim")
|
3. |
Remove the hands free mic after loosening the connector and screw(3EA)
from roof top.
|
4. |
Check the continuity of Mic between terminals.
|
Adjustment
ETC module learning
procedure
When installing new ETC module or re-installing it, ETC module
learning procedure must be performed.
1.
Hold the ignition k ...
Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Removal
The side airbag cannot be disassembled from the seat back assembly,
so replace assembly when replacing the side airbag.
...