Hyundai Accent: Inspection
| 1. |
Inspect the check valve in the vacuum hose.
|
| 2. |
Check the boot for damage.
|
Removal
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical group - "Battery")
...
Installation
1.
Installation is the reverse of removal.
A.
...
See also:
Installation
1.
Installation is the reverse of removal.
•
...
Repair procedures
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Tr ...
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Hyundai Accent Manuals
В© 2011-2024 Copyright www.hamanual.com