Hyundai Accent: Installation

Inspection

1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement. ...

Evaporative Emission Control System

...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the ther ...

Removal
1. Turn ignition switch OFF. 2. Disconnect the brake fluid level switch connector (A) from the reservoir. 3. ...

Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...