Hyundai Accent: Output Speed Sensor. Specifications
Hyundai Accent RB (2010-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Specifications
Specifications
▷ Type: Hall effect sensor
|
Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
|
Air gap(mm)in. |
(0.85 ~ 1.3) 0.033 ~ 0.051 |
|
|
Output voltage |
High |
1.18 ~ 1.68 |
|
Low |
0.59 ~ 0.84 |
|
Output Speed Sensor. Description and Operation
Description
The output speed sensor (A) is a vital unit that measures the rate of
rotation of the transaxle's turbine shaft and output shaft, and delivers the
readings to the TCM. The se ...
Output Speed Sensor. Schematic Diagrams
Circuit Diagram
...
See also:
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
...
Removal
1.
Turn the ignition switch OFF and disconnect the negative
(-) battery cable.
2.
Disconnect the accelerator position sensor connector
...
Limitation of Active ECO operation
If the following conditions occur while Active ECO is operating, the system operation
is limited even though there is no change in the ECO indicator.
When the coolant temperature is low: The sys ...
Hyundai Accent Manuals
© 2011-2026 Copyright www.hamanual.com