Hyundai Accent: Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Front seat")
|
| 3. |
Loosen the seat belt buckle mounting bolt (A) and remove the seat
belt buckle switch.
|
Installation
Be sure to install the harness wires so they will not pinch or
interfere with other parts.
1.
...
See also:
Rear combination light bulb replacement (4 Door)
(1) Stop and tail light
(2) Rear turn signal light
(3) Back-up light
(4) Side marker
1. Open the trunk lid.
2. Remove the service cover by pulling out the service cover.
3. Remove the sock ...
Limp Home Function
1.
Limp Home By Tester
If the PCM (ECM) detects the fault of the SMARTRA or transponder,
the PCM (ECM) will allow limp home function of the immobilizer. Limp
h ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Hyundai Accent Manuals
В© 2011-2026 Copyright www.hamanual.com