Hyundai Accent: Removal

Hyundai Accent RB (2010-2018) Service Manual / Restraint (Advanced) / Airbag Module / Side Airbag (SAB) Module. Repair procedures / Removal

The side airbag cannot be disassembled from the seat back assembly, so replace assembly when replacing the side airbag.

1.	Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.

2.	Remove the front seat assembly. (Refer to the Body group - "Seat")

3.	Remove the seat back assembly. (Refer to the Body group - "Seat")

Side Airbag (SAB) Module. Repair procedures

...

Installation

Be sure to install the harness wires not to be pinched or interfered with other parts. ...

See also:

Replacement
Front Brake Pads 1. Remove the brake hose mounting bracket bolt (A). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ...

Installation
1. Install the fog lamp. 2. Reconnect the fog lamp connector. 3. Connect the negative (-) battery terminal. ...

Removal
Pressure Side Impact Sensor • Removal of the airbag must be performed according to the ...

Hyundai Accent Manuals

© 2011-2026 Copyright www.hamanual.com