1. |
Disconnect the battery (-) terminal.
|
2. |
Remove the audio unit.
(Refer to the BE group - "Audio")
|
3. |
Remove the heater & air conditioning controller (A) and disconnect
the connector.
|
Removal
1.
Turn ignition switch OFF.
2.
Disconnect the brake fluid level switch connector (A) from the
reservoir.
3.
...
Inspection
1.
Check the coil spring for crack and deformation.
2.
Check the coil spring pad for damage and deformation.
...
Installation
1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve
upward.
2.
Install the water inlet fitting ( ...