1. |
Disconnect the battery negative cable and wait for at least 3
minutes before beginning work.
|
2. |
Remove the roof trim.
(Refer to the Body group - "Interior")
|
3. |
Disconnect the curtain airbag harness connector.
|
4. |
After loosening the mounting bolts remove the curtain airbag.
|
Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
If engine doesn't turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and t ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraul ...