Hyundai Accent: Body Control Module (BCM). Repair procedures

Function

Door Lock / Unlock Control Control the following function as Door Lock/Unlock Control by Relay control. • IGN Key reminder • Crash Door U ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

See also:

Removal
Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the d ...

Replacement
Repair tire after using the Tire Mobility Kit (TMK) When the TPMS warning lamp OFF 1. Remove the TMK repaired tire, wheel and TPMS sensor. (Refer ...

Installation
1. Place the thermostat in the block. Install the thermostat (B) with the jiggle valve upward. 2. Install the water inlet fitting ( ...