Hyundai Accent: If engine turns over normally but does not start
1. Check fuel level.
2. With the ignition switch in the LOCK position, check all connectors at ignition coils and spark plugs. Reconnect any that may be disconnected or loose.
3. If the engine still does not start, call an authorized HYUNDAI dealer or seek other qualified assistance.
If engine doesn't turn over or turns over slowly
1. If your vehicle has an automatic transaxle, be sure the shift lever is in
N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and t ...
Emergency starting
Connect cables in numerical order and disconnect in reverse order. ...
See also:
PODS-F Zeroing procedure
You should perform PODS-F Re-zero procedure after service or replacement
about all part of the passenger seat. (Not included full seat assembly)
1.
Ignition “OFF” ...
Schematic Diagrams
Schematic Diagram
Connector pin number
Pin No.
Discription
Remark
1
-
2
- ...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 3 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
...
Hyundai Accent Manuals
