Hyundai Accent: Tires/Wheels

Rear Torsion Beam Axle. Repair procedures

Replacement [Disc Type] 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Alignment. Repair procedures-Revised

...

See also:

Installation
1. Install the power window switch module. 2. Install the door trim panel after reconnecting the relevant connectors ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes. ...

Limitation of Active ECO operation
If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The sys ...