Hyundai Accent Manuals

Hyundai Accent: Disassembly - Steering Column and Shaft. Repair procedures - Electric Power Steering - Steering SystemHyundai Accent: Disassembly

Hyundai Accent RB (2010-2018) Service Manual / Steering System / Electric Power Steering / Steering Column and Shaft. Repair procedures / Disassembly

Key lock assembly
1.
Make a groove on the head of special bolts (A) by a punch.
2.
Loosen the special bolt using a screw driver and then remove the key lock assembly from the steering column assembly.
3.
Reassembly is the reverse of the disassembly.
Universal joint assembly
1.
Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly.
Tightening torque :
29.4 ~ 34.3N.m(3.0 ~ 3.5kgf.m, 21.7 ~ 25.3lb-ft)

2.
Reassembly is the reverse of the disassembly.

Replacement
1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the fro ...

Inspection
1. Check the steering column for damage and deformation. 2. Check the steering column for damage and deformation. 3. ...

See also:

Antenna
Roof antenna Your car uses a roof antenna to receive both AM and FM broadcast signals. This antenna is a removable type. To remove the antenna, turn it counterclockwise. To install the antenna, ...

35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
Specifications Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.5 ~ 0.1, 7.82 ~ 1.42 ...

Removal and Installation
1. Disconnect the battery terminals. (Refer to Engine and transaxle assembly in this group) 2. Remove the air cleaner assembly. (Refer to E ...

Hyundai Accent Manuals


В© 2011-2025 Copyright www.hamanual.com