Hyundai Accent: Map lamp

Push the lens (1) to turn the map lamp on or off. This light produces a spot
beam for convenient use as a map lamp at night or as a personal lamp for the driver
and the front passenger.
- DOOR : In the DOOR position, the map lamp and the room lamp come on when
any door is opened regardless of the ignition switch position. When doors are
unlocked by the transmitter, the map lamp and the room lamp come on for approximately
30 seconds as long as any door is not open. The map lamp and the room lamp goes
out gradually after approximately 30 seconds if the door is closed. However,
if the ignition switch is ON or all doors are locked, the map lamp and the room
lamp will turn off immediately. If a door is opened with the ignition switch
in the ACC or LOCK position, the map lamp and the room lamp stay on for about
20 minutes. However, if a door is opened with the ignition switch in the ON
position, the map lamp and the room lamp stay on continuously.
- ON : Map lamp and room lamp stay on at all times.
- OFF : The lights turn off even if a door is opened.
❈ When the lamp is turned ON by pressing the lens (1) the lamp does not turn
off even if the switch (2) is in the OFF position.
The interior lights automatically turn off approximately 20 minutes after the
ignition switch is turned off. ...
ON (1):
In the ON position, the light stays on at all times.
DOOR (2) :
In the DOOR position, the light comes on when any door is opened regardless of
the ignition switch position.
When doors ...
See also:
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harness connector as TCM side ...
Navigation system
The navigation system ascertains the present position of your vehicle by using
information from satellites and guides you to the place you assign as the destination.
Detailed information for the na ...
Checking the tire inflation pressure
1.After driving approximately 4~6miles (7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...