![Hyundai Accent: ECM Terminal And Input/Output signal [M/T] - Engine Control Module (ECM). Schematic Diagrams - Engine Control System - Engine Control/Fuel System](images/pages/small/314.png)
Hyundai Accent: ECM Terminal And Input/Output signal [M/T]
Hyundai Accent RB (2010-2018) Service Manual / Engine Control/Fuel System / Engine Control System / Engine Control Module (ECM). Schematic Diagrams / ECM Terminal And Input/Output signal [M/T]
| ECM Terminal Function (M/T) |
| Pin No. | Description | Connected to |
| 1 | Injector (Cylinder #3) [High] control output | Injector (Cylinder #3) |
| 2 | Injector (Cylinder #4) [High] control output | Injector (Cylinder #4) |
| 3 | Injector (Cylinder #2) [Low] control output | Injector (Cylinder #2) |
| 4 | - | |
| 5 | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] heater control output | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] |
| 6 | - | |
| 7 | Supply power (+5V) | Cruise control switch |
| 8 | - | |
| 9 | - | |
| 10 | - | |
| 11 | - | |
| 12 | Immobilizer indication lamp control output | Cluster |
| 13 | - | |
| 14 | Cooling fan relay [High] control output | Cooling fan relay [High] |
| 15 | CVVT Oil Control Valve (OCV) [Bank 1/Exhaust] control output | CVVT Oil Control Valve (OCV) [Bank 1/Exhaust] |
| 16 | Injector (Cylinder #2) [High] control output | Injector (Cylinder #2) |
| 17 | Injector (Cylinder #1) [High] control output | Injector (Cylinder #1) |
| 18 | Injector (Cylinder #3) [Low] control output | Injector (Cylinder #3) |
| 19 | - | |
| 20 | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor2] heater control output | Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] |
| 21 | - | |
| 22 | - | |
| 23 | Engine Coolant Temperature Sensor (ECTS) signal input | Engine Coolant Temperature Sensor (ECTS) |
| 24 | Sensor ground | Engine Coolant Temperature Sensor (ECTS) |
| 25 | - | |
| 26 | Fuel Tank Pressure Sensor (FTPS) signal input | Fuel Tank Pressure Sensor (FTPS) |
| 27 | Fuel pump relay control output (Without Immobilizer) | Fuel pump relay |
| Canister Close Valve (CCV) control output (With Immobilizer) | Canister Close Valve (CCV) | |
| 28 | - | |
| 29 | A/C compressor relay control output | A/C compressor relay |
| 30 | - | |
| 31 | Ignition coil (Cylinder #3) control output | Ignition coil (Cylinder #3) |
| 32 | Ignition coil (Cylinder #1) control output | Ignition coil (Cylinder #1) |
| 33 | Injector (Cylinder #1) [Low] control output | Injector (Cylinder #1) |
| 34 | Fuel Pressure Control Valve (FPCV) [High] control output | Fuel Pressure Control Valve (FPCV) |
| 35 | ETC motor [-] control output | ETC motor |
| 36 | - | |
| 37 | Knock Sensor (KS) signal input | Knock Sensor (KS) |
| 38 | Sensor ground | Knock Sensor (KS) |
| 39 | Blower switch Max. siganl input | Heater control module |
| 40 | Brake Light switch signal input | Brake switch |
| 41 | Wheel Speed Sensor [B] signal input [without ABS/ESC] | Wheel Speed Sensor (WSS) |
| 42 | Wheel Speed Sensor [A] signal input [without ABS/ESC] | Wheel Speed Sensor (WSS) |
| 43 | - | |
| 44 | - | |
| 45 | CVVT Oil Control Valve (OCV) [Bank 1/Intake] control output | CVVT Oil Control Valve (OCV) [Bank 1/Intake] |
| 46 | Ignition coil (Cylinder #4) control output | Ignition coil (Cylinder #4) |
| 47 | Ignition coil (Cylinder #2) control output | Ignition coil (Cylinder #2) |
| 48 | Injector (Cylinder #4) [Low] control output | Injector (Cylinder #4) |
| 49 | Fuel Pressure Control Valve (FPCV) [Low] control output | Fuel Pressure Control Valve (FPCV) |
| 50 | ETC motor [+] control output | ETC motor |
| 51 | - | |
| 52 | - | |
| 53 | Brake Test switch signal input | Brake switch |
| 54 | - | |
| 55 | Clutch switch signal input | Clutch switch |
| 56 | Electric load signal input [Defrost] | Alternator |
| 57 | Alternator COM signal output | Alternator |
| 58 | - | |
| 59 | Cooling fan relay [Low] control output | Cooling fan relay |
| 60 | Variable Intake Solenoid (VIS) valve control output | Variable Intake Solenoid (VIS) valve |
Connector [EGGM-KG]
| Pin No. | Description | Connected to |
| 1 | ECM ground | Chassis ground |
| 2 | ECM ground | Chassis ground |
| 3 | ECM ground | Chassis ground |
| 4 | Battery power (B+) | Main relay |
| 5 | Battery power (B+) | Battery |
| 6 | Battery power (B+) | Battery |
| 7 | Battery power (B+) | Main relay |
| 8 | Sensor ground | Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2] |
| 9 | Accelerator Position Sensor (APS) 1 signal input | Accelerator Position Sensor (APS) 1 |
| 10 | Sensor ground | Accelerator Position Sensor (APS) 2 |
| 11 | - | |
| 12 | Sensor ground | Fuel Tank Pressure Sensor (FTPS) |
| 13 | - | |
| 14 | Throttle Position Sensor (TPS) 1 signal input | Throttle Position Sensor (TPS) 1 |
| 15 | - | |
| 16 | - | |
| 17 | Fuel Level signal input | Fuel Level Sender (FLS) |
| 18 | Sensor power (+5V) | Accelerator Position Sensor (APS) 2 |
| 19 | - | |
| 20 | Sensor power (+5V) | Rail Pressure Sensor (RPS) |
| A/C Pressure Transducer (APT) | ||
| 21 | - | |
| 22 | Wiper switch signal input | Wiper switch |
| 23 | - | |
| 24 | Alternator PWM signal output | Alternator |
| 25 | - | |
| 26 | - | |
| 27 | - | |
| 28 | - | |
| 29 | Ignition switch signal input | |
| 30 | Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2] signal input | Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2] |
| 31 | Accelerator Position Sensor (APS) 2 signal input | Accelerator Position Sensor (APS) 2 |
| 32 | Sensor ground | Accelerator Position Sensor (APS) 1 |
| 33 | - | |
| 34 | - | |
| 35 | Sensor ground | Throttle Position Sensor (TPS) |
| 36 | Throttle Position Sensor (TPS) 2 signal input | Throttle Position Sensor (TPS) 2 |
| 37 | - | |
| 38 | - | |
| 39 | Sensor power (+5V) | Throttle Position Sensor (TPS) 1,2 |
| 40 | Sensor power (+5V) | Accelerator Position Sensor (APS) 1 |
| 41 | Sensor power (+5V) | Manifold Absolute Pressure Sensor (MAPS) |
| Fuel Tank Pressure Sensor (FTPS) | ||
| 42 | Sensor power (+5V) | Camshaft Position Sensor (CMPS) [Bank 1 / Intake] |
| Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] | ||
| 43 | A/C switch input | A/C control module |
| 44 | A/C pressure switch | A/C control module |
| 45 | A/C Pressure Transducer (APT) signal input | A/C Pressure Transducer (APT) |
| 46 | Vehicle speed signal input | Vehicle Speed Sensor |
| 47 | - | |
| 48 | - | |
| 49 | - | |
| 50 | Malfunction Indicator Lamp (MIL) control output | Malfunction Indicator Lamp (MIL) |
| 51 | - | |
| 52 | VS-/IP- (Common Ground for VS, IP) | Heated Oxygen Sensor [Bank 1/Sensor 1] |
| 53 | Rc/Rp (Pump Cell Voltage) | Heated Oxygen Sensor [Bank 1/Sensor 1] |
| 54 | - | |
| 55 | - | |
| 56 | Ground | Cruise Control Switch |
| 57 | - | |
| 58 | Rail Pressure Sensor (RPS) signal input | Rail Pressure Sensor (RPS) |
| 59 | Cruise Control Switch signal input | Cruise Control Switch |
| 60 | Start signal input | PDM module |
| 61 | LIN communication signal input | Battery sensor |
| 62 | - | |
| 63 | CAN [Low] | Other control module, Data Link Connector (DLC), Multi-Purpose Check Connector |
| 64 | Sensor ground | Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] |
| 65 | Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] signal input | Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] |
| 66 | - | |
| 67 | Crankshaft Position Sensor (CKPS) [B] signal input | Crankshaft Position Sensor (CKPS) |
| 68 | - | |
| 69 |
ECM Terminal And Input/Output signal [A/T]
ECM Terminal Function
(A/T)
Connector [EGGA-AG]
Pin No.
Description
Connected to
1
Injector (Cylinder #1) [High] ...
See also:
Positive Crankcase
Ventilation (PCV) Valve. Description and Operation
Operation Principle
...
Installation
•
Install the component with the specified
torques.
•
...
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra distance for braking.
Av ...
Hyundai Accent Manuals
© 2011-2024 Copyright www.hamanual.com