Hyundai Accent: Engine Control Module (ECM). Repair procedures

Circuit Diagram

(M/T) (A/T) ...

Removal

When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the ...

See also:

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor con ...

Repair procedures
Compession Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the comp ...