Hyundai Accent: General Information

Body Dimensions

...

General

1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

See also:

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...

Lubricants
Items  Specified lubricants  Quantity Input shaft spline CASMOLY L9508 0.2g clutch release cylind ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...