Hyundai Accent: Installation

Hyundai Accent RB (2010-2018) Service Manual / Clutch System / Clutch System / Clutch Master Cylinder. Repair procedures / Installation

1.

Installation is the reverse of removal.

•	Perform bleeding air procedure in clutch release cylinder after pouring the brake fluid. (Refer to "clutch release cylinder" in CH group)

Removal

• Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contac ...

Clutch Pedal. Components and Components Location

Components 1. Reverse hose 2. Master cylinder 3. Clutch switch 4. Ignition lock switch 5. Pedal pad ...

See also:

Removal
1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical group - "Battery") ...

Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly distribute the sealant in the tire. Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...

2. TCM Terminal Function
Connector [CHG-AA] Pin Description Pin Description 1 - 54 - 2 - ...

Hyundai Accent Manuals

© 2011-2025 Copyright www.hamanual.com