Hyundai Accent: Starter. Repair procedures

Starter. Components and Components Location

Components 1. Screw 2. Front bracket 3. Stop ring 4. Stopper 5. Overrun clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch 10. Arma ...

Removal and Installation

1. Disconnect the battery negative terminal. Tightening torque (-) terminal : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4l ...

See also:

Special Service Tools
Special Service Tools Item Illustration Application Fuel Pressure Gauge (09353-24100) Measuring the fuel line press ...

Removal
1. Disconnect the brake fluid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder res ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between ...