Hyundai Accent: Transaxle Oil Temperature Sensor. Description and Operation

Transaxle oil temperature sensor monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.

Installation

1. Installation is reverse of removal. In the case of the vehicle equipped wi ...

Transaxle Oil Temperature Sensor. Specifications

Specifications ▷ Type: Negative Thermal Coefficient Type Temp.[(°C)°F] Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 ...

See also:

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures reco ...

Installation
1. Install the heater & air conditioning controller. 2. Install the audio unit. 3. Connect the battery (-) ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia garnish (A). ...