Hyundai Accent: Transmitter. Repair procedures

Transmitter. Specifications

Specifications Item Specification Rated voltage DC 3V Service voltage range DC 2.7V ~ 3.5V Temperatu ...

Inspection

1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery and check vol ...

See also:

1. TCM Connector and Terminal Function
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to ...

Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below ...